[TowerTalk] new tower
K7LXC at aol.com
K7LXC at aol.com
Sat Jul 14 10:29:31 EDT 2007
In a message dated 7/13/2007 4:19:09 P.M. Pacific Daylight Time,
towertalk-request at contesting.com writes:
> I would like to install 170 feet of Rohn 45 tower. The problem is that
the
specs call for guy points to be 136 feet. My lot is only 170 feet wide
which will give me about 96 feet on each guy point. Is there anyway to
elevate the guy points enough, such as using H beam to make this work, or
increasing the size of the guy cables, pouring additional concrete, etc, the
tower can be bracketed to the poured concrete bond beam on a concrete block
garage at 10 feet if this would help.
The 80% Rohn figure is just one scenario. Different scenarios would
have different vectors and forces going on and you'll need an engineer to
suss it all out. There's no reason why you can't have 60% or even 50% guys with
the proper design. If you're going to get a building permit you'll need the
PE stamped package anyway so you might as well go ahead with it. You
probably have an engineer in your local ham club.
Cheers & GL,
Steve K7LXC
TOWER TECH
************************************** Get a sneak peak of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
More information about the TowerTalk
mailing list