[TowerTalk] Polarized Electrolytic in Rotator Box?

[Jim Lux]

At 03:31 PM 6/29/2007, Steve Katz wrote:
>You got a capacitor from ACE Hardware?  What a country!
>It should be non-polarized, though, if it's really an AC capacitor...
>-WB2WIK/6

Motor Start capacitors are usually non-polarized (they are 
electrolytic, but two in series reverse polarity)


>-----Original Message-----
>From: kd4e [mailto:kd4e at verizon.net]
>Sent: Friday, June 29, 2007 2:30 PM
>To: TowerTalk at contesting.com
>Subject: [TowerTalk] Polarized Electrolytic in Rotator Box?
>
>May I use a 108-130UF 250VAC polarized electrolytic
>starting capacitor from ACE hardware to replace the
>bad one in my CDE/HamII rotator control box?
>
>--
>
>Thanks! & 73, doc, KD4E
>Personal: http://bibleseven.com/kd4e.html
>Ham QTH: http://bibleseven.com/steel/cjb-steelhouse-index.html
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk