[TowerTalk] Tower Problem

[jeremy-ca]

There are 2 or 3 different size tube top sections. Most hams I know use the 
flat top section and mount a thrust bearing on it. Big arrays use a second 
bearing down in the tower about 4-5' and the rotator is mounted below that.

I also have a 45G top section for 2" tube that Im looking to swap for either 
a flat top section or a regular straight section.

Carl
KM1H


----- Original Message ----- 
From: "Ron Todd" <ron at k4wz.com>
To: <towertalk at contesting.com>
Sent: Saturday, June 30, 2007 2:51 PM
Subject: [TowerTalk] Tower Problem


>I have a 2' OD mast and a 2' ID top section Rohn 45 and of course the mast 
>want go inside the top section.
> I thought Rohn 45  2' top sections was just a little larger than 2".
>
> I guess I have to look for another top section.
>
> k4wz  ron
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>