[TowerTalk] 4 Element Steppir and T2X

[Keith Dutson]

I use a Yaesu G1000DXA to rotate a F12 C-4XL at 152 feet.  It has been up 3
years.  No problems so far.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of mryan001
Sent: Monday, March 12, 2007 11:42 AM
To: k2xx at swva.net; towertalk at contesting.com
Subject: Re: [TowerTalk] 4 Element Steppir and T2X

I would like to further examine the rotor question once Joe's question has
been satisfied. Is anyone using a Yaesu 1000 rotor or Yaesu rotors in
general and if so what are your impressions, better or worse, pros and cons
as opposed to the T2X?  - thanks...  - Mike

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of Joe Giacobello
Sent: Monday, March 12, 2007 12:31 PM
To: towertalk at contesting.com
Subject: [TowerTalk] 4 Element Steppir and T2X


Is anyone turning a 4 element Steppir with a T2X?  If so, has performance
been satisfactory.? Any problems in high winds, etc.?

73, Joe
K2XX

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk