[TowerTalk] Yaesu Rotor Problem

[W5KI at aol.com]

Getting closer, I think.  After following suggested  troubleshooting, found 
that the pot in rotor unit goes from zero (full  left), rotating right, to 
400ohms at approximately 225 degrees, then drops  immediately to ZERO for the next 
45 degrees...  not good... will put a  500 ohm pot across the control unit to 
confirm that there is not also  a problem in the display unit.  Then try 
finding the replacement  pot for the rotor from Yaesu...  
 
Thanks, Steve 
<BR><BR><BR>**************************************<BR> AOL now offers free 
email to everyone.  Find out more about what's free from AOL at 
http://www.aol.com.