[TowerTalk] Yaesu Rotor Plug

[Joe Giacobello]

Skip, that's useful information.  My rotor was obtained new about two 
weeks ago and the schematic identifies P13 as NJC-207-PF, and that's the 
same number that was in the correspondence from W9AE.  His 
correspondence was a couple of years old though.  And it wouldn't be the 
first time that manuals weren't kept up to date.

Anyhow, in my case, both the original and replacement plugs were 
Nanaboshi, but there was no part number shown.  I can't find the packing 
slip, but I don't think it showed the Nanaboshi number on it; just the 
Yaesu part number.

73, Joe

KJ6Y at aol.com wrote:
> To all concerning the Yaesu connector on the rotor.  Early  version of the 
> Yaesu rotor used a different connector that the later  version (I believe it was 
> the SDX ).   They looked dimilar but the early  versions were smaller.  
>
> Skip,  KJ6Y
> _Communications Service  Co_ (http://members.aol.com/kj6y/skip.html) 
> 818-887-3569 
>
>
>
>
> ************************************** AOL now offers free email to everyone. 
>  Find out more about what's free from AOL at http://www.aol.com.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>