[TowerTalk] What relay do Ameritron and Array Solutions use intheir coax switchs?
Tom McAlee
tom at klient.com
Sat May 12 09:42:01 EDT 2007
I don't know the manufacturer. But, if your goal is to obtain some, you can
buy those relays from Array Solutions:
http://www.arraysolutions.com/Products/ratpak.htm#relay
Scroll to the bottom. You'll see he sells the relays individually for $45
each... same relays used in the RatPak, SixPak, etc.
If you really just want to know who makes them, perhaps if you call or email
Jay he will tell you.
73,
Tom, NI1N
----- Original Message -----
From: "W7CE" <w7ce at curtiss.net>
To: <towertalk at contesting.com>
Sent: Friday, May 11, 2007 9:24 PM
Subject: [TowerTalk] What relay do Ameritron and Array Solutions use intheir
coax switchs?
>I am designing a custom coax relay. I own a couple of Ameritron RCS-8V
> switchs and am pretty happy with them, especially since they are rated to
> 250+ MHz. I recently looked inside an Array Solutions Ratpak and noticed
> that it uses exactly the same relay as the Ameritron. I've been trying to
> figure out who is the manufacturer of this particular relay and after much
> time with Google have hit a dead end. Both switches use a form X
> (shorting
> bar mounted on the two arms at the contacts) SPDT, 12V open-frame relay
> with
> the following marking: X99KP 12VDC RSCO. It appears the X99KP is the
> part
> number and RSCO is the vendor name or code. Does anyone know who makes
> this
> relay? You can see a picture of it at www.w7ce.com/relay.html.
>
> Thanks & 73,
> Clay W7CE
More information about the TowerTalk
mailing list