[TowerTalk] Found a used tower - any ideas what this is?

[Scott McClements]

Hi,

I found what I believe to be a Rohn brand, freestanding tower. The
tower looks like its good shape, so I was wondering if any one could
identify this tower. Any ideas on the specs?

http://picasaweb.google.com/mcclements/Tower380RohnSSV

There are four 20' sections total (80 feet total), the bottom section
is 27" across, outside diameter. The bottom mounting flanges are
4.5"x4.5". That was all I was able to measure from the ground. The
rungs on the bottom section are bolted whereas the top three sections
appear to have the runs welded.

Any info/ideas would be appreciated.

-Scott, WU2X