[TowerTalk] LMR400-PL259s

[Gary K9GS]

If you're worried about the glove conducting you're probably doing something 
you shouldn't be doing anyway.

Go to a woodworking supply store like Woodcraft.  They have carvers gloves 
made of Kevlar.


73,
 Gary

 ++++++++++++++++++++++++++++++++++++++++++++++++
  K9GS
  Gary Schwartz           email: k9gs at arrl.net
  Check out K9NS on the web: http://www.k9ns.com
  Society of Midwest Contesters (SMC)     GMDXA
 ++++++++++++++++++++++++++++++++++++++++++++++++

----- Original Message ----- 
From: "Perry - K4PWO" <k4pwo at comcast.net>
To: <towertalk at contesting.com>
Sent: Tuesday, September 04, 2007 11:06 PM
Subject: Re: [TowerTalk] LMR400-PL259s


>A good glove for cutting protection is a fillet glove.  It a stainless 
>steel
> mesh glove and you can find them at fishing supply stores like Bass Pro. 
> Of
> course, you'll need to keep well away from live circuits with it on! ;->
>
> ----- Original Message ----- 
> From: <donovanf at starpower.net>
> To: <towertalk at contesting.com>
> Sent: Tuesday, September 04, 2007 10:07 PM
> Subject: Re: [TowerTalk] LMR400-PL259s
>
>
>> Box cutters are dangerous tools, intended to be used at a safe distance
>> from body parts.  Using a box cutter near your opposite hand or other 
>> body
>> parts can easily result in an accidental deep cut right to the bone, and
>> now you have a serious injury to deal with.
>>
>> If you use a box cutter to prepare coaxial cable, be sure you wear a
>> substantial glove on the opposing hand!
>>
>> 73
>> Frank
>> W3LPL
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>