[TowerTalk] Second And Third Age Old Questions

[Peter Voelpel]

Why not fix the coax well above the Tic Ring, do the rotator loop there and
then clamp the cable down the guy support of the beam?

73
Peter

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Hardy Landskov

>2) What's the best way to route cable when using a Tic Ring?  FYI.  the 
>rings are just above guy attachment points.
>
This has been a tough one for me. The worst possible arrangement.  The coax
will hang up on the guy wires; and if too close will get into the Tic Ring.
I had both happen. It generally takes a precise length of coax so that
neither happens. You have to experiment.

GL N7RT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk