[TowerTalk] Repairing and rebuilding the Tail-Twister rotator

[Dave Harmon]

Jim.....very nice and informative procedure of a little known but often used
part of an amateur station.
I'll be over tomorrow before lunch so you can get started on my busted TT.

Regards

Dave Harmon
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of jpk5lad at cox.net
Sent: Monday, April 21, 2008 5:11 PM
To: TOWERTALK at contesting.com
Subject: [TowerTalk] Repairing and rebuilding the Tail-Twister rotator

Some time ago I added a page to my website which described all the 
steps I used to rebuild a Ham II rotator, complete with lots of 
pictures.  It turned out to be a very popular site and I got a lot of 
good feedback from others that it had helped.  It was located at:
http://www.hayseed.net/~jpk5lad/Rotors/Tail-Twister.htm
under the menu option #1.

I've now added some more information, this time on my activities of 
repairing and rebuilding my Tail-Twister rotator.  Again, there are 
lots of pictures, several questions answered, and hopefully, some 
help for anyone who wants to attempt the same operation.  You can 
find it by going to the same URL above and choosing the proper menu 
choice.  You can also get to it directly at:

http://www.hayseed.net/~jpk5lad/Rotors/Tail-Twister.htm

or    http://tinyurl.com/5432vj

Since there doesn't seem to be too much information available on the 
Internet on this topic, I hope this can help someone.

73,
Jim - K5LAD





"It's so simple to be wise. Just think of something
stupid to say and then don't say it." -- Sam Levenson
--------------------------------------------------------------------
http://www.hayseed.net/~jpk5lad/
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk