[TowerTalk] WT-51 pull-up cable routing question

[Steve Katz]

Yep.  It goes through a pulley at the top of the base section and then connects to the bottom of the middle section.  Another cable does the same thing on the next section up.  Only two cables, no pull down, pretty simple. -WB2WIK/6

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of HR Myler
Sent: Friday, August 01, 2008 9:56 AM
To: towertalk at contesting.com
Subject: [TowerTalk] WT-51 pull-up cable routing question


On a WT-51, does the pull-up (raise) cable loop around a pulley at the  
top of the first section and then the bottom of the middle section?  
Anybody got a diagram they could send?

TIA,

KC4ZVF
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk