[TowerTalk] Rotator cable connections

[Michael Fox (K5MEF)]

I have some Belden 9405 rotator cable which contains two wires of 16 AWG and
6 wires of 18 AWG. 

 

Where should the 16 AWG wires be used - the CW and CCW pins?  I'm thinking
CW and CCW since those appear to provide current to the motor.  POS, POT &
GND seems to be for reading position off the Potentiometer.

 

73,

Michael - K5MEF

 

--

We are what we repeatedly do.  Excellence, then, is not a single act, but a
habit. -- Aristotle