[TowerTalk] Tailtwister Rotor wires

[RICHARD SOLOMON]

One of the locals had a great scheme, once you connect the larger
motor wires the rest follow the Resistor Color Code (B-B-R-O, etc).
 
No need to write anything down.
 
73, Dick, W1KSZ



> From: k5fnq at cox.net> To: towertalk at contesting.com> Date: Mon, 4 Aug 2008 20:46:39 -0500> Subject: [TowerTalk] Tailtwister Rotor wires> > OK, I admit to screwing up. but it was for a good cause.> Local was doing tower work and had rotor problems. I volunteered to come > home and get my TX2 control box in case his was bad.> I wrote down the color code when I took off the wires and have now lost the > little piece of paper I used.> > I think I have it right as the manual has the color codes, it has just been > up too long to be sure.> > I see in the manual a way to check resistance on the wires.> Is this the only way to try and figure out the wiring or do I have to get > someone up the tower to check?> Yeah it was a dumb move, but all for a good cause at the time.> Art K5FNQ> > _______________________________________________> > > > _______________________________________________> TowerTalk mailing list> TowerTalk at contesting.com> http://lists.contesting.com/mailman/listinfo/towertalk