[TowerTalk] quick-disconnect for rotor wires etc.?

[Doug Renwick]

I sold a bunch of 8 pin trailer connectors at Dayton 2008.  I think I
have 3 pairs left.

Doug

The water jump is long and the barrier may be high, 
you might break every bone, but it's so much fun to fly!

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of W5CPT
Sent: August 9, 2008 9:09 AM
To: Randy; towertalk at contesting.com
Subject: Re: [TowerTalk] quick-disconnect for rotor wires etc.?

I used two 4 Pin Trailer connectors - back to back.  That is one has the
female on the rotor and the other has the male on the rotor with the
matching pieces on the cable.  They are designed to be used outdoors and
are waterproof.  They can be had at any place that handles auto parts.
They do make an 8 pin but to my knowledge they are not available
locally. 

Clint - W5CPT

  ----- Original Message ----- 
  From: Randy 
  To: towertalk at contesting.com 
  Sent: Saturday, August 09, 2008 9:41 AM
  Subject: [TowerTalk] quick-disconnect for rotor wires etc.?


  Hi TT'ers.
  What is the most economical and/or preferred method of disconnecting 
  rotor wires, remote coax switch wires, etc.,
  when not in use? Cinch-Jones plugs? And who has the best deals on such

  connectors?
  Thanks.

  73,
  Randy
  KZ4RV

  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk at contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk