[TowerTalk] Rohn tower U-bolts

[Marlon K. Schafer]

If stainless ones of a slightly larger size will work for you I've got what 
must be 20 or 30 lbs of them now.  My Andrew 24dB grids all ship with two 
but I only use one.  Hate to just toss stainless so I've got a big box full 
in the corner.

If they'll help, or if anyone wants to pay shipping you can have all but a 
few I like to keep on hand.  Mostly 2" but there are other sizes in there 
too.

laters,
marlon

----- Original Message ----- 
From: "Richard L. King" <k5na at ecpi.com>
To: <towertalk at contesting.com>
Sent: Thursday, January 24, 2008 7:14 AM
Subject: [TowerTalk] Rohn tower U-bolts


>I need some Rohn tower galvanized U-bolts to attach accessory plates
> to the legs of Rohn 25G and 45G. I think the U-bolt size for both
> size tower accessory plates will be the same.
>
> I have been looking around the web for these items and don't seem to
> be looking at the right place.
>
> I have several accessory plates that are missing U-bolts or the
> U-bolts were previously replaced with the wrong material and are now 
> rusted.
>
> Generally speaking the U-bolts are 3 inches long, 1.5 inch inside
> diameter, and threaded about 1.5 inches. I think, but not sure, that
> they are about 5/16th in diameter.
>
> Where have other folks found the official replacement for these U-bolts?
>
> 73, Richard - K5NA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk