[TowerTalk] Ground Mounted Vertical Question

[RLVZ at aol.com]

Hi Guys,
 
I'm installing a full-size ground mounted 1/4 wave vertical.  I  mounted the 
vertical on a 5' pipe.  The vertical is insulated from the mast  pipe using a 
base from an old Hustler 4BTV vertical.  I will now get  to work on the ground 
radials.
 
Question: With the full-size ground mounted vertical connected only to the  
5' mounting pipe, no radials, I thought I'd see what the SWR and impedance  is. 
 I was expecting a low impedance of about 10 ohms.   (poor ground = low 
impedance = low performance)
 
However, using a MFJ-259B at the input of the antenna the  impedance, at 
resonant freq. is 100 ohms.  (SWR over 2:1 as would  be expected at 100 ohms).
 
I'll install the ground radials next... but the above doesn't seem  right.
 
All thoughts appreciated!
 
73,
Dick- K9OM  



**************Get the scoop on last night's hottest shows and the live music 
scene in your area - Check out TourTracker.com!      
(http://www.tourtracker.com?NCID=aolmus00050000000112)