[TowerTalk] How many cans of Prelube 6?

[Dino Darling]

Its easier to remove the cables and spray them.  I stake one end on the
edge of the yard with the cable laying on the CLEAN concrete side walk. 
I'll lift the cable in my hand using a rag behind it to absorb the
overspray.  I walk backwards letting the anchored cable run through my
hands.  I keep a constant pool of Prelube 6 flowing over the cable as I
spray it into my rag covered hand.

I've also done this IN the tower and it is a mess.  YMMV.

Dino - K6RIX
dino at k6rix.com

-------- Original Message --------
Subject: [TowerTalk] How many cans of Prelube 6?
From: "Scott McClements" <kc2pih at gmail.com>
Date: Wed, July 16, 2008 10:34 am
To: "Towertalk Reflector" <towertalk at contesting.com>

I think I've decided on Prelube 6 for the new cables for my HDX572.
How many spray cans would I need and what is the best way to apply it
the first time? Should I spray the cables off the tower and then
install - or is that a mess? Install first and then coat?

-Scott, WU2X
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk