[TowerTalk] 40m OWA

[Robert Morris]

Am I having a comprehension problem? I read Peter's note as asking for 
design information, to modify an antenna, with material on hand, not 
where to get parts. Thanks for the links.

Mark Robinson wrote:
> I found this place which might be a good source for materials
> 
> http://www.speedymetals.com/
> 
> 
> ----- Original Message ----- 
> From: "Richards" <jruing at ameritech.net>
> To: "Peter Voelpel" <df3kv at t-online.de>
> Cc: <towertalk at contesting.com>
> Sent: Sunday, 27 July, 2008 10:30 AM
> Subject: Re: [TowerTalk] 40m OWA
> 
> 
>> Why not get a specifications / instructions on the original design.
>> It will have the measurements and parts descriptions you need.
>>
>> After you get the design down, spacing etc., I think
>> DX Engineering and Penninger Radio both have parts that are
>> nicely made and work well for making alum antennas.
>>
>> www.DXEngineering.com
>>  www.penningerradio.com
>>
>> That is where I would start.
>>
>> =============  K8JHR  ============
>>
>> Peter Voelpel wrote:
>>
>>> Is there anywhere around with a good design on a 48 foot boom which seems 
>>> to
>>> be proven length for that beam?
>>
>> ===================================================
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.