[TowerTalk] making air wound coils (was Johnson Matchbox coil)

[Kenneth D. Grimm, K4XL]

The article was in CQ a couple of months back.  It was a two parter, but 
you can go directly to the author's web site and download the entire 
thing.  http://www.ad5x.com/articles.htm  About half way down the list, 
you will find "Build your own air-wound coils and coil supports."
73,
Ken - K4XL


Rob Atkinson wrote:
> One of the ham magazines, either CQ or QST (but I'm pretty sure it was
> CQ) had a good article with photos a month or three ago on how to make
> your own air wound coils, including how to fabricate the spacers.  If
> you can get access to CQ for the past six months (i.e. if you know
> someone who subscribes) go through them and it should be in there.
>
> 73,
>
> rob / k5uj
> _

-- 

Ken K4XL
k4xl at arrl.net

*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr


No virus found in this outgoing message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.5.6/1576 - Release Date: 7/27/2008 4:16 PM