[TowerTalk] Any hands on experience with 40m loop?

[David Gilbert]

For about a year I used a 40m vertical loop with the apex at 55 feet, 
fed at the bottom and kite-shaped to give a 50 ohm feedpoint impedance.  
It was simple to support and worked well, and like all full wave loops 
had the advantage of tuning reasonably on 20m (and of course 15m).  I 
never did a direct comparison to a half-wave dipole (probably not 
possible to avoid invalidating interactions if done with the same 
support anyway), but as you say modeling shows a dipole at the same 
height beating the loop.  After about a year I switched to multiple 
dipoles with separate feedlines.

If you want multiple bands with one antenna the loop may be the better 
choice, but otherwise I'd stick with the dipole.

Take care es 73,
Dave   AB7E



John wrote:
> Anyone have hands on practical experience with a full wave loop on 40m in any configuration?  Interested in feedback on a half-square as well.  I have found it is VERY hard to beat a simple 1/2 wave center fed at 70' feet or so.  Any actual comparisons would be perfect.  I know what the modeling programs say.
>
> Thanks...... 73 John K4NP
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>