[TowerTalk] Fw: Detailed R5 and or R7 Trap information

Marc Tessier - VE3TES ve3tes at cogeco.ca
Sun Mar 16 15:05:39 EDT 2008


Hello once again group, This time I write to you in hopes that someone out there has a Cushcraft R7 apart and or down on the ground. Reason I am hoping for this is simple, I recently purchased a used R7 from a fellow not too far away from me, and after spending  9+ hours yesterday,trying to get the match in a somewhat reasonable operational range, I decided to consider the inevitable, that the traps have been dismantled and not re-installed properly.  I now know this to be a fact, because after a quick search through the archives here on tower talk, I found a post by the person I bought the antenna from dated 2005, where he was looking for similar information I am looking for today, dimensions and spacing of all traps on the R7. So far to date I have managed to get 20,30 and 40 M to load up inside the bands, all others are either just outside or ridiculously way out of band for resonance.

So If you are willing to take some time to go thru each trap I need information for, by all means I would be very grateful for your time and help...
Feel free to drop me a line or two, and I can better explain what information I require in a greater detail , and save some bandwidth of this reflector. I have already touched base with Cushcraft customer support and they no longer offer any documentation on the traps for the R5 and or R7.
I plan on creating a web page or two with this data for use by other poor unsuspecting souls that may have either taken their unit apart, without paying attention to the details required to assuring proper re-assembly or they too purchased a antenna in a similar fashion that I did... 
I would also be interested in hearing from anyone with an R5 on the ground or apart, especially seeing as I already have the 20 to 40M traps setup nicely now. I am going to assume that, Cushcraft just used similar traps for both antennas on like bands.. i.e. 10/12 m traps should be the same on both antennas...

Here's hoping someone out there is willing to help me, I really need to get this antenna operational. I already have way to much money invested in it...

Marc Tessier - VE3TES



More information about the TowerTalk mailing list