[TowerTalk] Using a dip meter

Scott McClements kc2pih at gmail.com
Thu Mar 20 22:23:53 EDT 2008


On 3/20/08, Dave Hachadorian <K6LL at arrl.net> wrote:

> The quad loop must be continuous, with no insulators.

Dave - Thank you for addressing my question. You point out something
here - this was my 75 meter loop - which is not parasitic. Its driven,
so its broken at the feedpoint with an center insulator.

Would that cause a problem? The manual gave one example for reading
antenna resonance - a ground mounted vertical. It showed a loop in the
vertical section of the antenna.

-Scott, WU2X


More information about the TowerTalk mailing list