[TowerTalk] CDE Ham series of rotor questions

[Ed]

>Hello I am looking for some info if possible, I am building a rotor control
box 
>for a light duty rotor I have here , and I am basing my design on a Ham 2 
>Series of Rotor made By CDE. The questions I have are as follows...
 
>Question #1 What is the full scale defection rating of the meter in a CDE
rotor 
>control box, I.E. 100micro amps
 
The meter movement is 1 mA.
 
> #2 Does anyone know what the output voltage is for the meter 
>transformer as show in schematics found in the manual? There is no
indication 
>of secondary voltages shown in the schematic.

 

The controller provides 13 VDC to the feedback pot.

 

Let me know if you have any more questions.

 

Ed

WB6YTE