[TowerTalk] tower ground question
Jim Lux
jimlux at earthlink.net
Thu May 29 14:19:55 EDT 2008
-----Original Message-----
>From: "Roger (K8RI)" <K8RI-on-TowerTalk at tm.net>
>Sent: May 29, 2008 1:11 PM
>To: jim Jarvis <jimjarvis at optonline.net>
>Cc: David Gilbert <xdavid at cis-broadband.com>, towertalk at contesting.com
>Subject: Re: [TowerTalk] tower ground question
>
>jim Jarvis wrote:
>> David,
>>
>> Urban legends? I don't think so.
>>
>
>Along those lines: Is the standard tower base, rebar and all, large
>enough to even qualify as a UFER ground.
20 linear feet of metal (of a particular size rebar or copper or alumninum) is the code requirement. I would think the standard tower base rebar probably meets that standard.
>I, like you go the extra mile to make the shortest, most conductive path
>around the concrete.
>
>It seems like I read a paper on that subject when installing my tower
>and they were emphatic about keeping the lightning away from the
>concrete.
There are a lot of white papers out there that advocate various approaches, not always with good backup other than
"seems like a good idea". At risk of throwing gasoline on a fire.. contemplate porcupines.
Also there is the problem of conductors coming out through the
>side of the concrete with is considered bad practice.
I can't see why you'd want to bring any conductor out the side, although if it's above grade, it might be ok. The concern is with being below grade in a moist environment.
Jim
More information about the TowerTalk
mailing list