[TowerTalk] US Tower MA550
Alan NV8A
nv8a at att.net
Fri Nov 7 07:30:40 EST 2008
I don't know the diameter of the base section of that tower, but I would
suggest that you separate the copper ground wire from the galvanized
mast by a stainless-steel shim cut from a hose clamp. then clamp the
whole thing with another stainless-steel hose clamp -- or two
daisy-chained together if necessary.
Polyphaser makes coax grounding kits: four different ones, the choice
depending on the metals at each end. I have found DX Engineering to be a
very prompt supplier of Polyphaser products.
http://www.dxengineering.com/Products.asp?ID={2FF844DC-98FB-4AD3-B011-4CD3323C219D}&SecID=94&DeptID=19
73
Alan NV8A
On 11/06/08 10:48 pm Ron Buswell wrote:
> I recently acquired an MA550 tubular crank up tower. I was wondering if anyone knows of a good way to ground the base of the tower. I've been looking for some kind of stainless steel bracket to connect between the galvanized tower and a copper wire connected to a ground rod but have been unable to find any. Also, I am looking for some way to ground the coax to the ground rod.
>
> Any ideas??
More information about the TowerTalk
mailing list