[TowerTalk] what can go wrong with a Bencher YA-1 low pass filter

[Mark Robinson]

I have one of those too. I expect to see coils and capacitors inside. Maybe 
one of the capacitors started to fail short circuit or one of the coils 
started to open up. There could be a bad connection inside.

Mark N1UK


----- Original Message ----- 
From: "WW3S" <ww3s at zoominternet.net>
To: <towertalk at contesting.com>
Sent: Sunday, 16 November, 2008 5:47 PM
Subject: [TowerTalk] what can go wrong with a Bencher YA-1 low pass filter


> In the middle of SS this afternoon, started to get very high swr on
> transmit, although receive signals seemed fine, after trying different
> jumpers, etc, isolated it to the Bencher low pass filter....unit is 
> riveted,
> are there any servicable parts inside? What can go wrong?
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk