[TowerTalk] Ground Plane Model Problem
Steve Hunt
steve at karinya.net
Wed Nov 19 09:34:38 EST 2008
Tom,
A quarter-wave vertical over a perfect ground would be about 35 Ohms,
not 50-75 Ohms. But 10 Ohms still looks odd.
Can you post a copy of the EZNEC file somewhere so that we can take a look?
73,
Steve G3TXQ
K0SN wrote:
> Gentlemen:
> I have been modeling a ground plane vertical antenna with elevated radials.
> It's made of 3" aluminum tubing at a base height of about 15 feet.
> My problem is EZNEC is reporting the feedpoint impedance to be
> around 10 ohms, which disagrees with the conventional wisdom that
> says it should be in the vicinity of 50-75 ohms. Any suggestions? Has
> anyone encountered a similar problem while running EZNEC or another
> modeling program? Any input would be appreciated.
> Tom K0SN
> Porterfield, WI
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
More information about the TowerTalk
mailing list