[TowerTalk] need to know how to install rotator on tower

[David Robbins K1TTT]

Well, the usual process is to put the plate in the tower then bolt the rotor
down to it.  somewhere along the way you hook up the control cable.  Then
you drop the mast in it and away you go.  Give some more specifics, like
tower brand/model, type of plate, type of tower top section, mast, and oh
yeah, the brand/model of the rotor, and maybe we can give you more specific
answers.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: blewknight [mailto:blewknight at bellsouth.net]
> Sent: Thursday, October 16, 2008 02:34
> To: towertalk at contesting.com
> Subject: [TowerTalk] need to know how to install rotator on tower
> 
> trying to install rotator on 50' tower............. got plate and used
> motor no instructions
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk