[TowerTalk] LMR 240....removing the foli?!!
Roger (K8RI)
K8RI-on-TowerTalk at tm.net
Mon Sep 8 16:39:05 EDT 2008
fraz1 wrote:
> Hey Folks....
>
> Is there a reasonable and proper way to remove the foil in this stuff? It is almost embedded in the dielectric and I can't seem to remove it to my satisfaction.
>
Nearly all of the dual shield (foil plus braid) have the foil *bonded*
to the dielectric.
I just trim the end so none sticks over the dielectric. I don't see any
reason for removing the foil other than at the very tip and I run a KW
through CNT-240 on 40 meters.
If you really have to remove the foil about the only way is to scrape it
off with a razor blade or box cutter. Then you have to be very careful
about little metal whiskers.
73
Roger (K8RI)
> Thanks for any hints.
>
> 73 John K4NP
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
More information about the TowerTalk
mailing list