[TowerTalk] SteppIR Tuning Question

[n8br at buckeye-express.com]

Dick, it is easy to set up the steppir control box so it follows the frequency changes on the FT2000D.  Jerry at Steppir has the control box settings that will allow you to do that.  I am using a 3 element steppir with my FT2000 and also a Micoham decoder to switch all of my antennas.  The combination is easy to configure and it works fine.  Not to worry.  

Bill, N8BR

--- w1ksz at q.com wrote:

From: RICHARD SOLOMON <w1ksz at q.com>
To: TowerTalk <towertalk at contesting.com>
Subject: [TowerTalk] SteppIR Tuning Question
Date: Sat, 13 Sep 2008 21:42:08 +0000

I am slowly gravitating to the 3 el Steppir instead of the Tennadyne T-10.
Since I have a YAESU FT-2000D, how does one tune the antenna to the
proper frequency ? I don't want this box talking to that box talking to that
box. This thing is expensive enough.
I just want the radio and the controller.
I have a sinking feeling I know the answer, but thought I would check with
someone who has an FT-2000D.
 
Tnx, Dick, W1KSZ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk