[TowerTalk] feedback from M2 15M6 and 20M5 owners

[Jorge Diez - CX6VM]

hello,
 
if some one there assembled the M2 antennas, 20M5 and 15M6, will apreciate
some help.
 
for the 20M5:
 
    what´s are the frecuencies for the diferent segments allowed, for
example CW-Low phone, low phone, full phone, full band and any tips when
assembly it. (sometimes the aluminium tubes are too short to assembly with
the CW dimensions to allow a reasonable lenght of aluminium inside the
other, don´t know if it´s the case with M2)
 
what´s the position of the balance point, for example from rear of the
antenna, to fix the the boom to mast plate. I need to preassembly a flexible
coaxial loop with connectors, so I want to know the lenght of this loop,
from the balun to the mast with a loop to allow the antenna rotation.
 
I know will vary because of the configuration you choose, but for examble
for CW-low phone.
 
 
for the 15M6:
 
what´s the position, of the balance point, for example from rear of the
antenna, to fix the boom to mast plate. I need to preassembly a flexible
coaxial loop with connectors, so I want to know the lenght of this loop,
from the balun to the mast with a loop to allow the antenna rotation.
 
Thanks,
Jorge
CX6VM