[TowerTalk] Phillystran to EHS

[Roger (K8RI)]

Cqtestk4xs at aol.com wrote:
>  
> In a message dated 4/10/2009 9:00:48 PM Greenwich Standard Time,  
> cqkg8co at yahoo.com writes:
>
> I am  having a little interaction between my TH-11 and my guy wires, so I 
> am  thinking of replacing a portion of the 1/4 EHS guy wire with some  
> Phillystran.
>
> I cannot seem to find information on how to make the  connection between 
> the EHS and the Phillystran.
>   

I use the Big Grips and thimbles for the size Phillystran in use  with a 
thimble and turnbuckle between the EHS and Phillystran.

73

Roger (K8RI)
> Thank  you
>
>
> Brian, KG8CO
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
> Back when I was in FL I used 502s all the time for that.  I also used  them 
> to connect Polyrod ends to EHS.  Some guys have had success using  thimble 
> over thimble.  I had access to some very inexpensive 502s, so I  used them.
>  
> With the old style Philly that was never a problem.  The Philly ends  were 
> the "bullet" type that had a clevis end, so it was only necessary to hook  
> the clevis over the thimble.
>  
> 73 Bill KH7XS/K4XS
> **************A Good Credit Score is 700 or Above. See yours in just 2 easy 
> steps! 
> (http://pr.atwola.com/promoclk/100126575x1220814837x1201410725/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26
> hmpgID%3D62%26bcd%3DAprilfooterNO62)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>