[TowerTalk] Rohn 20/25G leg insulator material

[GALE STEWARD]

Here's a link to one way to fabricate an insulated base.

http://mysite.verizon.net/vze7hjw3/id2.html


Here's the ones available from Comtek Systems. They look excellent but are pretty expensive.

http://www.comteksystems.com/

73, Stew K3ND



--- On Mon, 4/13/09, Roger (K8RI) <K8RI-on-TowerTalk at tm.net> wrote:

> From: Roger (K8RI) <K8RI-on-TowerTalk at tm.net>
> Subject: Re: [TowerTalk] Rohn 20/25G leg insulator material
> To: 
> Cc: TowerTalk at contesting.com
> Date: Monday, April 13, 2009, 8:36 PM
> Mark Robinson wrote:
> > The consensus was to use solid FR4 G10 rod.
> >   
> I wonder about that as ground fiberglass is sensitive to
> degradation by 
> moisture and UV.
> 
> > These guys sell it and I believe that they can do the
> machining required.
> >
> > http://www.jjorly.com/g10_rod_rods.htm
> >   
> I think I also saw a $250 minimum order.
> 
> 73
> 
> Roger (K8RI)
> >