[TowerTalk] HyGain HyTower Questions

[Tim Duffy K3LR]

Hi Allen (and others)!

Here is what I built:

Length then Diameter
Or
Length then Face width for the 3 tower sections

96" 15.5" face
92.5" 13" face
92.5" 11" face
51" 2" OD
24" 2.5" OD
110.5" 2" OD
62" 1.25
40" 1.125
40" 1.000
72" 0.875
32.25" 0.750
51.25" 0.625
56"  0.500
60" 0.375
21" 0.250

73,
Tim K3LR
 

-----Original Message-----
From: Brier, Allen (MOODY INTERNATIONAL) [mailto:Allen.Brier at bp.com] 
Sent: Wednesday, August 05, 2009 9:56 AM
To: k3lr at k3lr.com
Subject: RE: [TowerTalk] HyGain HyTower Questions

Tim,

Can you provide some details on your modification? I am very interested
in duplicating your design.

73,

Allen R. Brier SET
Fire & Gas System Specialist / F&G Major Projects Technical Authority
BP Exploration Alaska
949 East 36th Avenue, Suite 400 (428A)
Anchorage, Alaska 99508
907-762-1118 (Office)
713-705-4801 (Cell)
281-342-1590 (TX office)
allen.brier at bp.com

-----Original Message-----
From: Tim Duffy K3LR [mailto:k3lr at k3lr.com] 
Sent: Tuesday, August 04, 2009 6:34 PM
To: 'Dan Schaaf'; TowerTalk at contesting.com
Subject: Re: [TowerTalk] HyGain HyTower Questions

Hello Dan!

The original HyTower was designed for the "high end" of 80 meters (above
3.9
MHz). To use it below 3.9 required the addition of the base inductor.

When I decided to build my 80 meter 4 square antennas out of HyTowers
(stripped of all side stubs) it required extending the 2" section and
several of the smaller diameters of tubing in order to achieve 0 ohms of
reactance at 3.510 MHz. The final total height is 75 feet. The large
diameter reduction from the 24 ft of tower to the aluminum "stinger"
causes
the length to be much longer with the HyTower mechanical design than it
would be if the elements were made from #14 wire (the entire length).

Hybrid fed 4 squares achieve minimum power in the dump load with
elements
that are self resonant lower in frequency (140 KHz in this case). So the
minimum power is 0 watts in the dump load at 3.65 MHz - with the
elements
tuned for 3.510 MHz.

Here is a photo of one of the 80 meter 4 squares using extended HyTowers
at
K3LR http://www.k3lr.com/Vertical/MVC-750X.jpg


73!
Tim K3LR

http://www.k3lr.com



-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Dan Schaaf
Sent: Tuesday, August 04, 2009 7:16 PM
To: TowerTalk at contesting.com
Subject: [TowerTalk] HyGain HyTower Questions

I am looking to understand how the HyTower can be advertised as a 1/4
wave
antenna on 80 meters. The standard 1/4 wave length at 3.6 MHz is
approximately 65 feet, yet this antenna is 53 feet tall on 80 meters.

Vy 73, Dan K3ZXL
http://www.k3zxl.com
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk