[TowerTalk] Philly installation

[Cqtestk4xs at aol.com]

You do not need the heavy duty stuff!!!!! DO NOT use it.  You  can not 
tension it to the proper tension as it will be pulling way too hard on  the Rohn 
25 tower.  The 6K stuff must be tightened to around 690  pounds.  You need 
to use the stuff which is equivalent to 3/16 EHS.  I  believe it is 3900#.  
That needs to be tightened to 390  pounds.
 
Getting the heavier duty stuff will get you nothing for your extra  money 
spent and if you tighten it to the specified torque, it will actually be  
hurting the tower.  Buy the 3/16 equivalent.  It is exactly what you  need.
 
I've worked with Philly since the 80s and know what I'm talking  about.  
Whoever told you you want to go with the 6900# stuff doesn't know  what he is 
talking about.  The 6900# stuff is for Rohn 45 and  55.