[TowerTalk] Rohn 25G tower up about 45 ft

[Jim Hargrave]

Bruce,

I would suggest installing guy wires to the bottom of the Hazor. Run the
Hazor up and then tighten each guy wire. This will stabilize the tower when
the antenna is raised to the top. They can just lay loose when the antenna
is lowered.

We installed slopers to the bottom of my son-n-law's Hazor which double as
guy wires.

   * 73's Jim W5IFP *
     w5ifp at gvtc.com

   >-----Original Message-----
   >From: towertalk-bounces at contesting.com
   >[mailto:towertalk-bounces at contesting.com]On Behalf Of W8HW
   >Sent: Monday, December 14, 2009 21:24
   >To: towertalk at contesting.com
   >Subject: [TowerTalk] Rohn 25G tower up about 45 ft
   >
   >
   >I have a Rohn 25G tower up about 45 ft. The base is 13 bags of
   >concrete and have a bracket up about 8.5 ft. but have no guide
   >wires because of hazer. I am wondering if this tower will
   >support the Chushcraft X7 antenna? You may replay direct email below.
   >
   >73, Bruce, w8hw at att.net
   >_______________________________________________
   >
   >
   >
   >_______________________________________________
   >TowerTalk mailing list
   >TowerTalk at contesting.com
   >http://lists.contesting.com/mailman/listinfo/towertalk