[TowerTalk] AB-577 AB-621 Winch Motor

[Jim Chaggaris]

Ed,

What a great question!  I was thinking about doing something like this for
my Ab-577.  My rotator cuffs would thank me...

73,
Jim N9WW

James Chaggaris
President
PowerOne Corp./PowerOne Environmental
1020 Cedar Avenue
Suite 203
St. Charles, IL 60174
Phn: (630) 443-6500
Fax: (630) 443-6505
Website: www.pwrone.com


The information contained in this message is intended only for the personal
and confidential use of the recipient(s) named above. If the reader of this
message is not the intended recipient or an agent responsible for delivering
it to the intended recipient, you are hereby notified that you have received
this document in error and that any review, dissemination, distribution, or
copying of this message is strictly prohibited. If you have received this
communication in error, please notify PowerOne Corporation immediately, and
delete the original message.


-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Ed G
Sent: Wednesday, December 16, 2009 5:08 PM
To: towertalk at contesting.com
Subject: [TowerTalk] AB-577 AB-621 Winch Motor

Hi Folks,
     Has anyone ever used a small motor to crank the mast up on an AB-577 or
621?  If so, are there any recommendations for a particular motor type or
mfgr?  Seems like it would be easy to couple the motor to the gearbox using
a 1/2 inch shaft and coupling.
--Ed--


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk