[TowerTalk] aluminum tubing

john at kk9a.com john at kk9a.com
Fri Dec 18 18:24:18 PST 2009


That is not really a standard diameter, but 0.625 is.  Aluminum tubing is 
commonly available in two different alloys, 6061 and 6063.  The later is 
generally less expensive but may have a lower tensile strength, depending on 
the heat treatment.    Tubing is either be drawn or extruded.  Drawn tubing 
is more accurate and better for telescoping, but more expensive.  You should 
be able to find long pieces of tubing from a local aluminum supplier or from 
http://www.metal-cable.com/

John KK9A / P40A



To: <towertalk at contesting.com>
Subject: [TowerTalk] aluminum tubing
From: "Joe Barnes"
Date: Thu, 17 Dec 2009 19:51:41 -0500
List-post: <towertalk at contesting.com">mailto:towertalk at contesting.com>

Does anyone know of a place to buy .60" aluminum tubing in 9 foot or more
pieces?

What I have seen at Texas towers is in shorter sections than that.

Thanks. 



More information about the TowerTalk mailing list