[TowerTalk] Fw: Force12 Mag2/2 2el on 80/75 & 40

Al Williams alwilliams at olywa.net
Sat Jun 6 11:29:16 PDT 2009


----- Original Message ----- 
From: Al Williams 
To: towertalk at contesting.com 
Sent: Saturday, June 06, 2009 11:27 AM
Subject: Fw: Force12 Mag2/2 2el on 80/75 & 40



----- Original Message ----- 
From: Al Williams 
To: towertalk at contesting.com 
Sent: Saturday, June 06, 2009 7:58 AM
Subject: Force12 Mag2/2 2el on 80/75 & 40


I would like to get in touch with anyone that has experience with the subject antenna or knows of someone that has had experience with it.

I purchased it several years ago and then purchased a Steppir Monstr so I don't need the 40m capability of the 2/2 although it might be nice to have.  The Mag 2/2 is still in the box and I am trying to decide whether to attempt to put it together and install it on my second 70' crankup.

The 2/2 uses linear loading at the drive end.  I haven't been able to get satisfactory results with my modeling using wire for the tubing.  I don't know if the problem is the modeler or the antenna?

The 2/2 appears to be a complicated assembly and also a complicating tuning process. The 2/2 has two relays that will switch the freq 
to the hi or lo part of the band as well as a small freq discursion on each end of the band.

As I already have two wire 80m inverted vee dipoles at right angles to each other that are about 100' high at the center and 70" high at the ends, I suspect that the 2/2 would not show much improvement and would not be worth the effort. I use a tuner with my wire dipoles so I can go anywhere in the band ok.


k7puc




More information about the TowerTalk mailing list