[TowerTalk] Yaesu G-2800DXA Not Rotating

[Joe Giacobello]

I had a similar symptom with a 2800, i.e, restricted turning range.  In 
my case, the bolts holding the mast clamps to the rotor body had 
vibrated loose and fallen out.  A quick inspection will reveal whether 
this is the problem or not.

73, Joe
K2XX

Paul Price Jr. wrote:
> I just turned on my control box last night and tried to work some stations when I noticed when I tried to rotate my beam the control box was very slow, in addition, it would only turn in the range of 60-180 degrees. This morning, I went outside and disconnected the ICE spike protector and went back inside to find out nothing had changed. I climbed the tower to see if anything looked kinked or twisted but didn't find anything out of sorts. Does anyone have any experience with a similar problem and any ideas as what I need to do before I pack this thing up and send it back to Yaesu in California? Using my Fluke meter it would be nice to be able to determine that it's just a bad cable. However, the fact that the rotor turns slowly and only partially makes me think its in the rotor its self... Ideas? 
>
> PS: I love the rotor but I'll be darned if I ever buy something that can't be worked on by Norms or Rotor Dr. This thing may have to go back to Japan since Yaesu doesn't keep parts on hand, from what I've read!
>
> Best of 73s, 
> Paul - <k5hsv at arrl.net> 
>
>
>       
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>