[TowerTalk] Pinning my mast in rotator clamp

[mrlogs]

Thanks Joe..Tom  N3ZC
  ----- Original Message ----- 
  From: Joe - WDØM 
  To: mrlogs 
  Cc: towertalk at contesting.com 
  Sent: Wednesday, March 11, 2009 8:44 PM
  Subject: Re: [TowerTalk] Pinning my mast in rotator clamp


  Mine (G-1000 SDX) has been pinned for about 10 years...it survived 123 mph wind gusts in Alaska, and here in CO, 90 mph gusts.  Not a problem.

  73

-- 
Joe Hannigan - WDØM
Pagosa Springs, CO

http://www.WD0M.com
http://www.pagosarocks.com
http://www.quiltqueen.net


  mrlogs wrote: 
Hi All..
  My Yaesu G-1000DXA manual say's to drill thru the mast & put a bolt thru the rotator & mast to keep it (the mast) from turning in the clamp. I was told to do a survey here & get everyone's input on doing this as it might be a bad idea..
                         Thanks for your input!
                            73'..Tom  N3ZC