[TowerTalk] Rotor for Long Cable Run
Cqtestk4xs at aol.com
Cqtestk4xs at aol.com
Sun May 10 16:31:54 PDT 2009
Almost any of the larger rotors will work for you if you have heavy enough
wire running to it. I have a Tailtwister mounted on a 150 foot tower which
is located about 475 feet from the station. I use regular 14/2 wiring up
to it. I combine the black and white to make one conductor in one length,
do the same for the second run and in the third I use three of the
conductors for terminals 3,4,5 and one of the remaining ground lines from the
first run for number 6. The starter cap is mounted by the rotor eliminating
the last two lines, 7 and 8.
The tradewinds get up to about 25-30 MPH at times and the rotor works fine
on the M2 4 el 40 meter Yagi.
By the way, the cost for the run even with inflated KH6 prices was around
$125. Tailtwister used was $350. It's hard to beat that total price.
Bill KH7XS/K4XS
**************Recession-proof vacation ideas. Find free things to do in
the U.S.
(http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002)
More information about the TowerTalk
mailing list