[TowerTalk] common winch mounting holes?

[jd_hudson at comcast.net]

Joe you beat me to your website hi hi which BTW I used to mount my 2550 on the TX455

73
John
KO4XJ
www.w4nja.org/ko4xj.htm 
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Joe - WDØM <wd0m at wd0m.com>
Date: Fri, 13 Nov 2009 09:57:18 
To: luke webber<luke_webber at hotmail.com>
Cc: <towertalk at contesting.com>
Subject: Re: [TowerTalk] common winch mounting holes?

Hi Luke,

I've replaced the K1550 with a K2550 on my US Tower TX-455.  It did 
require a different bolt pattern, which I accommodated by making an 
adapter plate.  You can check it out by going to my web page, then click 
on Ham Radio, then Fulton K2550 on a TX-455.  Maybe that will give you 
some ideas....

http://www.wd0m.com

73

Joe
WDØM

luke webber wrote:
> Hello everyone
>
> im hoping you can help educate me on the options i might have for replacing a Fulton K1550 winch.  Are the mounting holes for that winch similar to other winches?  Just curious to know if i have to modify the mounting location.
>
> I heard that Dutton Lainson has similar winches with similar bolt hole locations...are there any others for that size of winch?
>
> Thanks in advance for the help
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk