[TowerTalk] Tension

[K7LXC at aol.com]

In a message dated 9/2/2009 12:02:26 P.M. Pacific Daylight Time,  
towertalk-request at contesting.com writes:

>  I use the LOOS  Model  PT-2 for Tension  adjustments.  Is the PT-2 good 
for Phillystran also ?
 
    The only one you can actually measure directly is  the HPTG4000. The 
jacket of Phillystran makes it oversized compared  to steel guys so the 
problem is getting the little gate on the Loos to  accept it. Other Phillystran 
sizes cannot be measured directly. Since you  should be using steel guys from 
the end of the Phillystran to the anchor  anyway, you can measure the steel 
guy with no problem. 
 
Cheers,
Steve    K7LXC
TOWER TECH 



 
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)