[TowerTalk] CATV splices

[Hector Garcia XE2K]

Tod

What I did is to find the old Style hard line connectos a very small ones that fit in the noon corrugated /or the old aluminum 1/2 inch  50ohms hardline
Andrew and other brands (old ) work, never try the new version for corrugated.



J. Hector Garcia XE2K / WT6J

   Mexicali B.C  DM22fp

P.O.Box 73 

El Centro CA 92244-0073

USA

http://www.xe2k.net

http://www.dxxe.org

--- On Sun, 9/20/09, Tod - ID <tod at k0to.us> wrote:

From: Tod - ID <tod at k0to.us>
Subject: [TowerTalk] CATV splices
To: towertalk at contesting.com
Date: Sunday, September 20, 2009, 1:45 PM

Not sure if this qualifies for posting on this reflector but I will take a
chance..

I installed another underground run of 1/2" CATV hard line. Regrettably,
there was a crimp buried in the middle of the 200 foot coil and we had to
excise the flaw. Now I need to splice the ends together if I intend to send
signals out and get stuff back. 

Once upon a time I had a number of 1/2" CATV splice connectors but either I
used them up or their location has left my memory for good.

I wonder if anyone has a couple of the splices -- probably removed from CATV
line retrieved from the junk yard. If so I would like to see if I can become
the owner of them.

Failing that it is off to the hardware store to find plumbing components
that can be coupled together to do the splice.


Tod, KØTO


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk