[TowerTalk] Booms

[Rex Lint]

Steel, but just for the splice - you've seen that, right?  Like a
"stiffener".

    -K1HI-

     Rex Lint, Consultant
     26 Brek Drive
     Merrimack, NH 03054
     PH:    603-860-7651    


-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of K7LXC at aol.com
Sent: Wednesday, September 23, 2009 6:52 PM
To: towertalk at contesting.com; singlesideband at yahoo.com
Subject: Re: [TowerTalk] Booms

 
In a message dated 9/23/2009 5:25:52 A.M. Pacific Daylight Time,  
towertalk-request at contesting.com writes:

>  To the Ham wanting three inch boom materials .
Have you  thought about 3' rigid emt conduit? The heavy gage?


    Is that steel or aluminum? There's a reason why  amateur antennas are 
made from aluminum. 
 
Cheers,
Steve     K7LXC
UP THE TOWER -
The Complete Guide To Tower Construction
_www.championradio.com_ (http://www.championradio.com)   





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk