[TowerTalk] question on where to run coax

Joseph or Ruth Patrick hdmc38 at bellsouth.net
Mon Aug 16 07:19:48 PDT 2010


Hello Dick

 I don't think that as far as lightning is concerned it makes much difference 
where you put it. If your tower takes a direct hit It depends on alot of things 
on what happens to your feed line.I prefer to mount the feed line one the inside 
of the tower. This will give some degree of protection from physical damage when 
working or MAINTAINING your towers. Most people use tape and that's OK, just use 
good tape like Scotch #33 or 88 electrical tape. Always cut the the tape with a 
sharp scissors and you will never have a flag. Klein makes a pair for this and 
there small and work great. I aways carry them when working on towers. When I 
built my tower I used standoffs for the feed line. Now they are expensive but 
worth it if have to work on or add another line for that new antenna you just 
added. Andrew and Tessco have them. I really like them but $300 bucks buys alot 
of tape! You can also mark multiple lines with colored phasing tape so you know 
which one to work on. Buy the way I do use tape after the rotor loop and up the 
mast to the antenna. It's just eaiser. Just my HOP. 
 73 K4XZ Joe Patrick


More information about the TowerTalk mailing list