[TowerTalk] RG-6

[Roger (K8RI)]

Mike wrote:
> They assume that you are going to use compression fittings with that stuff
> unfortunately.
>   
Unfortunately?  Compression connectors are generally good and much 
better than the cheap crimp connectors generally seen, easy to attach, 
mechanically sound, and mostly waterproof. OTOH they do take an 
insertion tool though.

73

Roger (K8RI)
> Mike
>
> -----Original Message-----
>
>
> It's not meant to be soldered it's supposed to be crimped on to an F type
> connector.
>
> -----Original Message-----
> From: Barrie Smith [mailto:barrie at centric.net]
> Sent: Sunday, February 14, 2010 4:11 PM
> To: Tower and HF antenna construction topics.
> Subject: [TowerTalk] RG-6
>
>
> I recently purchased 200' of RG-6 from Lowes for a receiving antenna.
>
> The braid is real strange stuff.  Looks, act and feels like steel.  I can't
> get ordinary, resin-core solder to attach at all.  The solder just beads up
> and falls off.
>
> Any suggrstions as to how to solder this stuff?
>
> 73, Barrie, W7ALW
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.435 / Virus Database: 271.1.1/2686 - Release Date: 02/14/10
> 07:35:00
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>