[TowerTalk] Dual rotor controllers

[Joe Subich, W4TV]

> Does this mean you need the master powered up to use the slave?

The master needs to be powered up to read direction (for the 
meter to operate) on the slave. 

73, 

   ... Joe, W4TV 
  




> -----Original Message-----
> From: towertalk-bounces at contesting.com 
> [mailto:towertalk-bounces at contesting.com] On Behalf Of Dick NY1E
> Sent: Thursday, February 25, 2010 9:12 AM
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Dual rotor controllers
> 
> 
> >With two HAM-4/HAM-5/T2X controllers, remove the meter
> >fuse from one unit (this is the "slave").
> 
> Does this mean you need the master powered up to use the slave?
> 
> Dick NY1E
> www.ny1e.com
> 
> 
>       
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk